樓承板這種板材的應用目前來講是非常廣泛的，有人就會問：既然樓承板應用這么好，那它能用來做房子嗎？實際上，是可以的！主要是樓承板本身優勢足，可利用的性能好，下面來了解了解吧。

　　The application of floor bearing plate is very extensive at present, some people will ask: since the application of floor bearing plate is so good, it can be used to do the house? Actually, yes! It is mainly the floor bearing board itself advantage enough, can use the performance is good, to understand it.

　　樓承板可作為永久性模板，施工方便，有效縮短工期，降低成本；具有優良的力學性能，用作復合樓板時，可全部或部分起到樓板底部鋼筋的作用；平坦的底部和均勻的小接縫使板底非常漂亮；減少混凝土和鋼材的用量。為減少結構的永久荷載，在高層或超高層建筑中應用更為廣泛。

　　Floor bearing plate can be used as permanent template, convenient construction, effectively shorten the construction period, reduce the cost; It has excellent mechanical properties. When used as composite floor, it can play the role of reinforcing bar at the bottom of the floor in whole or in part. The flat bottom and even small seams make the plate bottom very beautiful; Reduce the use of concrete and steel. In order to reduce the permanent load of structure, it is more widely used in high-rise or super high-rise buildings.

　　樓承板做房子時的安裝需要認真才行，比如：鋪設前對彎曲變形者應矯正好；板梁頂面要保持清潔，嚴防潮濕及涂刷油漆未干；安裝板梁前，應在梁上標出板梁鋪放的位置線。鋪放板梁時，鄰兩排板梁端頭的波形槽口應對準；應嚴格按照圖紙和規范的要求來散板與調整位置；按照實際排版圖進行鋪設，連接固定。等等。

　　The installation of the floor plate when the house needs to be serious, such as: the bending deformation should be corrected before laying; The top surface of the plate beam should be kept clean, and damp and dry paint should be prevented. Before installing the plate beam, the position line of the plate beam should be marked on the beam. When the plate beam is laid, the waveform notch at the end of the adjacent two rows of plate beams should be aligned; Should be in strict accordance with the requirements of the drawings and specifications to loose plate and adjust the position; Lay according to the actual layout drawing and fix the connection. And so on.

　　樓承板做房子時的吊裝也需要按照標準對待，比如樓承板按圖紙放線安裝、調直、壓實并點焊牢靠，波紋對直，以便鋼筋在波內通過；樓承板鋪設完畢、調直固定后應及時用鎖口機具進行鎖口，防止由于堆放施工材料或人員交通，造成壓型板咬口分離；安裝完畢，應在鋼筋安裝前及時清掃施工垃圾，剪切下來的邊角料應收集到地面上集中堆放。

　　The lifting of the floor plate when the house also needs to be treated in accordance with the standard, such as the floor plate according to the drawing wiring installation, straightening, compaction and spot welding firm, corrugated straight, so that the steel bar in the wave through; After the floor bearing plate is laid and straightened and fixed, it should be locked with the locking machine in time to prevent the separation of pressure plate bite due to the stacking of construction materials or personnel traffic; After the installation, the construction garbage should be cleaned in time before the installation of reinforcement, and the cut off scraps should be collected and piled up on the ground.

　　還有關于濟南樓承板施工時的關鍵要點也要了解，比如：在樓承板施工以前，應根據健全安全生產管理的要求做好安全技術交底，層層落實安全生產責任制；定期與不定期的進行安全檢查，經常開展安全教育活動，使全體職工提高自我保護能力；非施工人員禁止進入施工樓層，免焊接弧光灼傷眼睛或晃眼造成摔傷，避焊接輔助施工人員應戴墨鏡配合施工。等等。

　　There are also key points about the construction of Ji 'nan floor bearing plate should also be understood, such as: before the construction of the floor bearing plate, according to the requirements of sound safety production management to do a good job of safety technology disclosure, layer upon layer to implement the safety production responsibility system; Regular and irregular safety inspection, often carry out safety education activities, so that all staff to improve self-protection ability; Non-construction personnel are forbidden to enter the construction floor, avoid welding arc light burn eyes or dazzling eyes caused by falling injury, avoid welding auxiliary construction personnel should wear sunglasses to cooperate with the construction. And so on.

　　總之，濟南樓承板用來做房子時的注意事項是很多的，不僅關系到房子的整體質量，還關系到施工人員的安全，所以需要嚴謹起來。更多內容就來我們網站www.liondatech.com咨詢咨詢吧！

　　In short, ji 'nan floor plate used to do the house is a lot of attention, not only related to the overall quality of the house, but also related to the safety of the construction personnel, so need to be rigorous. Come to our website www.liondatech.com for more information!